|
We Accept Payments Via
What is PayPal?
NFIB represents the interest of 600,000 small and independent business owners before federal and state legislative and executive branches of government. As a matter of policy, NFIB does not endorse or promote the products and services of its members.
| |
|
Why Acrylic? The
Reasons Are Simple . . .
|
|
|
Long Lasting Beauty
|
|
Acrylic-surfaced bathroom fixtures have a
long-lasting, high-gloss surface that is extremely smooth and warm to
the touch. Acrylic is extremely hard and non-porous. So,
dirt, soapy film, and germs can't penetrate. |
|
Toughness and Durability
|
|
Cast acrylic will not fade, chip or
discolor under normal use and conditions. It is chemical and stain
resistant. Properly maintained, acrylic surfaces will retain their
glossy, new look for virtually a lifetime. |
|
Easily Repaired
|
|
Acrylic is strong, and withstands normal
abuse. In instances where it is damaged, because the color goes
all the way through, most scratches can be buffed out. It can be
quickly and easily repaired without loss of durability. |
|
Ease of Cleaning
|
|
Acrylic's high gloss surface is mildew and
algae resistant and is easily cleaned with recommended mild household
cleaners. |
|
Rich, Permanent Colors
|
|
Won't fade or dull in sunlight. |
|
High Heat Retention
|
|
Slower dissipation of heat, providing a more
comfortable bathing experience.
|
Compare the benefits of acrylic versus other common
materials:
|
CAST ACRYLIC |
GEL COAT/FIBERGLASS |
| Acrylic's hardness and high gloss make it
very easy to clean |
Gel coat/fiberglass can show wear and tear,
making cleaning more difficult |
| Acrylic is virtually non-porous, making it
less susceptible to mildew, soap scum, and other chemicals |
Gel coat/fiberglass being more porous may
absorb these by-products, causing dulling and discoloration in the
long-term |
| Since acrylic's color goes through the entire
material, most scratches can be buffed out easily |
Because gel coat is a thin veneer of plastic
over fiberglass, scratches are more difficult to repair |
| Acrylic is color fast and weatherable and
will retain its high-gloss appearance for many years |
Gel coat/fiberglass is less weatherable and
may fade and dull over time |
| Acrylic's finished side never touches the tub
mold during the manufacturing process, so its finish is protected from the
beginning |
In manufacturing, the gel coat finished side
directly contacts the tub mold increasing the chance of surface
imperfections and contamination |
|
CAST ACRYLIC |
ENAMELED STEEL/
CAST IRON |
| Acrylic provides high heat retention for a
more comfortable bathing experience |
The enameled steel/cast iron surface is cold
and dissipates the heat of the water faster |
| Since acrylic's color goes through the entire
material, most scratches can be buffed out easily and other repairs are
often not visible |
The enamel layer over steel or cast iron is a
thin veneer easily chipped and difficult to repair, leading to corrosion
and rust of the metal underneath |
Back to New Tubs/Showers
|
